Open-band profile and dual magnets
Everyday wear
The open band gives the Ring a straightforward fit and a warm copper accent that works across hands and personal styles.
Fit & everyday wear
The open-band design allows for a gentle adjustment, which is intended to hold its shape for everyday wear. At approximately 6 mm wide and weighing 6–8 grams, the Ring keeps a slim, lightweight profile on the hand.
Wear it on any finger within the stated range, on either hand. The opening can face inward or outward.
Use gentle, even pressure during initial fitting. Avoid repeated bending, squeezing, or widening, which can weaken the band over time.
The Ring is designed for direct skin contact, with two magnets positioned on the inside of the open ends.
What customers appreciate about the Ring
Share how it fits, how you wear it day to day, and what you value about it. Write a review →
Why copper?
Copper conducts electricity exceptionally well. In purpose-built shields, films, meshes, and enclosures, it can help reflect and absorb electromagnetic energy. How those structures are made—and where they are placed—determines their performance.
Copper’s ability to carry electrical current makes it useful throughout electrical and electronic systems, including structures designed to reduce electromagnetic interference.
A continuous copper shield behaves differently from an open band. Coverage, thickness, openings, and frequency all influence the result.
The Quantum™ EMF Ring combines a real copper coating over a base-alloy core with a clear protective sealant and two neodymium magnets.
Material science
Published research explores how copper films, meshes, and shields interact with electromagnetic energy. These studies help explain copper’s engineering uses—and why the structure being tested matters.
A 2022 study examined a continuous, conductive copper-based film and reported substantial shielding at 3.5 GHz under laboratory conditions. The result applies to the film and configuration tested.
Explore the copper-film study ↗Research on copper shields for MRI equipment compared continuous and slotted designs. Shielding decreased near the slots, showing why gaps and electrical continuity matter.
Explore the researchers’ findings ↗A 2024 study tested engineered copper meshes across a defined microwave frequency range. Larger openings reduced measured shielding, illustrating how geometry changes performance within the same material system.
Explore the copper-mesh study ↗Illustrative comparison
Select each view to compare the same field path with and without an engineered copper barrier. This visual explains a materials-science principle; it does not represent a Ring test.
These principles help explain why copper is used in electromagnetic engineering. The Quantum™ EMF Ring combines a real copper coating over a base-alloy core with two neodymium magnets in an open-band design made for direct-to-skin wear.
BEAM™ is Conscious Copper’s product-design approach. In the Ring, that approach combines a copper-coated band, two neodymium magnets, and direct-to-skin wear, designed to attenuate EMF exposure.
Care & finish
A micro-thin clear sealant helps slow oxidation of the copper surface. With wear, that coating can gradually diminish, and the finish may change color or develop a patina. How soon visible changes appear can vary.
Light splashes and handwashing are fine; dry thoroughly afterward. Remove the Ring before showering, bathing, swimming, or soaking in hot tubs or salt water.
Wipe with a soft, dry microfiber cloth. For residue, use lukewarm water and mild, non-abrasive soap, then dry immediately and completely.
Avoid chemical jewelry dips, abrasive scrubbing pads, and heavy metal polishes, which can damage the protective finish.
Adjust gently during initial fitting. Repeated bending, squeezing, or widening can cause metal fatigue and weaken the band.
| Construction | Real copper coating over a base-alloy core |
|---|---|
| Protective finish | Micro-thin clear sealant |
| Magnets | Two neodymium magnets, inside the open ends |
| Magnet strength | Approximately 1,500–2,000 Gauss per magnet |
| Fit | Adjustable to fit U.S. ring sizes 6–11 |
| Band | Approximately 6 mm wide and 2 mm thick |
| Weight | Approximately 6–8 g |
| Resting opening | Approximately 4–6 mm before adjustment |
| Wearing position | Any finger or thumb within range, either hand, direct skin contact |
| Origin | Designed in California; manufactured and finished through overseas partners |
| Included | Quantum™ EMF Ring, protective sleeve, care card, and Quick-Start Grounding Guide |
Your questions, answered
An EMF ring is a piece of wearable jewelry designed for EMF-conscious routines around phones, Wi-Fi, and other connected devices. The Quantum™ EMF Ring is Conscious Copper’s adjustable, copper-coated design with two neodymium magnets. It contains no powered electronics and is not a smart ring or activity tracker.
No. It has a base-alloy core coated with real copper and a micro-thin clear protective sealant. The sealant helps slow surface oxidation but does not permanently prevent discoloration or wear.
One adjustable Ring fits U.S. ring sizes 6–11. Gently shape it during initial fitting for a snug, comfortable fit. Avoid repeated bending, squeezing, or widening, which can weaken the band. The quantity options let you purchase multiple Rings; they are not different sizes.
Wear it on any finger or thumb within the stated size range, on either hand. Position the opening inward or outward according to comfort. The Ring is designed to rest directly against the skin.
Yes. Two neodymium magnets sit inside the open ends, each rated at approximately 1,500–2,000 Gauss. This describes their magnetic strength; it is not a measure of EMF exposure reduction or a demonstrated health benefit.
The Quantum Ring has not undergone standalone laboratory SAR chamber certification. The external studies linked on this page examine engineered copper shielding structures, not the Ring, and do not establish its effect on EMF exposure.
The Ring is water-resistant against light splashes and handwashing; dry it thoroughly afterward. Remove it before showering, bathing, swimming, or soaking in hot tubs or salt water to help preserve its finish.
It can. The protective sealant wears with use, and the copper surface may change color or develop a patina. The timing varies, so the finish is not guaranteed to remain unchanged for a particular period. Follow the care instructions and avoid harsh cleaners or abrasive polishing.
The protective coating does not guarantee that skin discoloration will never occur. Skin marks and changes to the Ring’s finish raise separate concerns. If you notice irritation, stop wearing the Ring. People with known copper or base-metal sensitivities should monitor their skin response.
The Ring contains magnets. If you use a pacemaker, ICD, insulin pump, or another medical device that may be affected by magnets, consult your healthcare provider before wearing it.
Quantum™ EMF Ring
Lightweight, adjustable, and finished in real copper, the Quantum™ EMF Ring is designed for direct-to-skin wear around the devices and electrical sources that are part of everyday life.
Build-a-Bundle savings apply automatically at checkout: 2 items save 10% · 4 items save 20%. With a single Ring selected, your Ring counts toward the bundle; the 2 and 4 packs already include their own savings.
Copper Bracelet$98 · 4.8★
EMF Necklace$98 · 4.87★
Ripple for Phone$88 · 4.94★
Lattice 2-Room$108 · 4.68★